Filter
Top Products
30
PRODUCT MANUAL 1012581
CHAPTER 3—CONFIGURING THE AUTOLOADER
4.
4.4.
4. Press or until the following screen appears:
5.
5.5.
5. Press to display the autoloader (library) SCSI ID selection screen:
6.
6.6.
6. Press or to scroll through the available values until the one you want
appears. The default SCSI ID for the autoloader is 0.
7.
7.7.
7. Press to select the new value. A confirmation message appears:
8.
8.8.
8. Press to enact the change (or if you don’t want to make the change).
The autoloader resets and the new ID takes effect. The LCD displays the
Home screen.
Tape Drive SCSI ID
To change the tape drive’s SCSI ID:
1.
1.1.
1. At the Home screen, press , , , or to access the main menus.
If necessary, enter the operator panel password (see page 42).
2.
2.2.
2. Press or until the Configuration menu appears:
3.
3.3.
3. Press to see the menu selections.
4.
4.4.
4. Press or until the following screen appears:
C h a n g e L i b r a r y
I D ? N o w = n
S e l e c t S C S I I D
N e w L i b . I D = n
S e t L i b r a r y I D
t o n n n o w ?
C h a n g e a
C o n f i g u r a t i o n
C h a n g e D r i v e
I D ? N o w = n