Filter
Top Products
32
PRODUCT MANUAL 1012581
CHAPTER 3—CONFIGURING THE AUTOLOADER
2.
2.2.
2. Press or until the Configuration menu appears:
3.
3.3.
3. Press to see the menu selections.
4.
4.4.
4. Press or until the following screen appears:
5.
5.5.
5. Press to display the emulation mode selection screen:
6.
6.6.
6. Press or to scroll through the available modes until the one you want
appears.
7.
7.7.
7. Press to select the new value. A confirmation message appears:
8.
8.8.
8. Press to enact the change (or if you don’t want to make the change).
9.
9.9.
9. Press (as needed) to return to the Home screen.
SETTING UP AUTOMATIC TAPE DRIVE CLEANING
The Autoclean option enables the autoloader to automatically perform tape
drive cleaning without operator intervention. When Autoclean is enabled, the
autoloader monitors the cleaning requirements of the tape drive. When the
drive indicates it needs cleaning, the autoloader loads the cleaning cartridge
into the tape drive. After the cleaning cycle is complete, the tape drive unloads
and ejects the cleaning cartridge, and the autoloader resumes operation.
C h a n g e a
C o n f i g u r a t i o n
C h a n g e E m u l a t i o n
N o w i n N a t i v e
S e l e c t E m u l a t i o n
x x x x x x
S e t E m u l a t i o n t o
x x x x x x n o w ?
!
! !
! Important
After changing the emulation mode, reboot your host
computer so that it recognizes the new emulation mode.