Filter
Top Products
OCTOBER 2006 MAGNUM 1X7 LTO AUTOLOADER
65
INSERTING AND REMOVING CARTRIDGES
b.
b.b.
b. Slide the cartridge fully through the access port until it snaps into place
in the cartridge cell.
c.
c.c.
c. Press any key. The door closes. The autoloader checks for the presence
of a cartridge in the specified cell, makes sure that the cartridge is seated
correctly, and updates the cartridge inventory. The cell selection screen
appears again with the next available cell number:
You can continue importing cartridges in the same manner until you have
filled as many cells as you want.
7.
7.7.
7. Press (as needed) to return to the Home screen.
Caution
Insert cartridges label-side first, as shown in
Figure 5-4. Do not insert cartridges with the label
and write-protect switch toward you. The arrow on
the cartridge must face toward the outside.
Figure 5-4 Inserting a cartridge into the autoloader
I m p o r t C a r t r i d g e
T o C e l l # n
Arrow
!
! !
! Important
If you plan to store a cleaning cartridge in the autoloader, you must
store it in cell 7.