Filter
Top Products
562
S:\agilent\8920\8920b\PRGGUIDE\BOOK\CHAPTERS\errormsg.fb
Error
−
286 Program runtime error
Error
−
300 Device-specific error
This code indicates only that a Device-Dependent Error as defined in IEEE 488.2,
11.5.1.1.6 has occurred.
Error
−
310 System error
Indicates that some error, termed “system error” by the device, has occurred.
Error
−
311 Memory error
Indicates that an error was detected in the device’s memory.
Error
−
312 PUD memory lost
Indicates that the protected user data saved by the *PUD command has been lost.
Error
−
313 Calibration memory lost
Indicates that nonvolatile calibration data used by the *CAL? command has been lost.
Error
−
314 Save/recall memory lost
Indicates that the nonvolatile data saved by the *SAV command has been lost.
Error
−
315 Configuration memory lost
Indicates that nonvolatile configuration data saved by the device has been lost.
Error
−
330 Self-test failed
Error −350 Queue overflow
This code indicates that there is no room in the queue and an error occurred but was not
recorded. This code is entered into the queue in lieu of the code that caused the error.