Filter
Top Products
340
S:\agilent\8920\8920b\PRGGUIDE\BOOK\CHAPTERS\memcard.fb
Chapter 6, Memory Cards/Mass Storage
Using the ROM Disk
Using the ROM Disk
The Test Set comes with several Test Procedures stored on the internal ROM disk.
These Test procedures provide instrument diagnostic utilities, periodic calibration
utilities, memory management utilities, a variety of general purpose utilities, and
several IBASIC demonstration programs.
To see a brief description of what each procedure does perform the following
steps:
1. Display the TESTS (Main Menu) screen by selecting the front-panel TESTS key.
2. Using the rotary knob, select the Select Procedure Location: field and
choose ROM from the choices.
3. Using the rotary knob, select the Select Procedure Filename field. A list of
Test Procedures stored on the ROM disk is displayed in the Choices: field. Using the
rotary knob, select the Test Procedure of interest.
4. A brief description of the Test Procedure will be displayed in the Description field.
ROM DISK cannot be written to for user storage.
The ROM Disk’s mass storage volume specifier is ":MEMORY,0,4"
For example: to catalogue the contents of the ROM Disk from the TESTS
(IBASIC Controller) screen enter:
30 OUTPUT 814;"AFAN:DEMP:GAIN 20 dB"