Filter
Top Products
513
Chapter 8, Programming the Call Processing Subsystem
Programming the ANALOG MEAS Screen
Filter 1
This field selects one of several standard or optional audio frequency filters which
can be used to condition the audio signal before being analyzed by the Audio
Frequency Analyzer.
See “AF Analyzer” on page 97 for programming command
syntax.
Filter 2
This field selects one of several standard or optional audio frequency filters which
can be used to condition the audio signal before being analyzed by the Audio
Frequency Analyzer.
See “AF Analyzer” on page 97 for programming command
syntax.
FM Deviation
This field displays the measured FM deviation of the carrier being transmitted by
the mobile station. Four dashes (----) indicate that no carrier is present to measure.
See “Measure” on page 147 for programming command syntax.
TX Freq Error
This field displays the frequency error (error = assigned carrier frequency -
measured carrier frequency) of the carrier being transmitted by the mobile station.
Four dashes (----) indicates that there is no carrier frequency present to measure.
See “Measure” on page 147 for programming command syntax.
TX Power
This field displays the measured RF power of the carrier being transmitted by the
mobile station. Four dashes (----) indicates that there is no carrier present to
measure.
See “Measure” on page 147 for programming command syntax.