Filter
Top Products
456
S:\agilent\8920\8920b\PRGGUIDE\BOOK\CHAPTERS\callproc.fb
Chapter 8, Programming the Call Processing Subsystem
Programming the CALL CONTROL Screen
Phone Num:
This field displays the phone number decoded from the MIN number received
from the mobile station on the reverse control channel in response to a forward
control channel message
The
Phone Num: field is only displayed when the Display field is set to Data
and a reverse control channel message containing this information has been
decoded.
Refer to the
Display field description, on page 444, for information on how to
read data in the upper right hand portion of the
CALL CONTROL screen.
CAUTION: Do not confuse the Phone Num: field, which is displayed in the upper right-hand portion
of the CALL CONTROL screen, with the Phone Num selection of the MS Id field.
NOTE: An all zero MIN number (000000000), which does not represent a valid phone number, will
convert to the following phone number: 111111?111.