Filter
Top Products
430
S:\agilent\8920\8920b\PRGGUIDE\BOOK\CHAPTERS\callproc.fb
Chapter 8, Programming the Call Processing Subsystem
Using the Call Processing Subsystem’s Remote User Interface
Figure 32 Connecting a Mobile Station to the Test Set
NOTE: Do not connect the antenna of the mobile station to the ANT IN port on the front panel of
the Test Set as this will cause the overpower protection circuitry to trip when the mobile
station is transmitting. Refer to the ANT IN field description in the User’s Guide for
further information.
Refer to the User’s Guide for detailed information on connecting a mobile station
to the Test Set.
ANT IN
Manufacturer’s
Special Fixture
AUDIO OUT
RF IN/OUT
AUDIO IN
LO
HI
Antenna
Speaker Out
Microphone In
Mobile Station