Filter
Top Products
368
S:\agilent\8920\8920b\PRGGUIDE\BOOK\CHAPTERS\ibasic.fb
Chapter 7, IBASIC Controller
Interfacing to the IBASIC Controller using Serial Ports
Setting Up Microsoft Windows Terminal on your PC (Windows Version 3.1)
1. Start the Terminal program in Windows.
2. From the Terminal Menu select Settings then Emulation.
3. Select DEC VT-100 (ANSI)
4. From the Terminal Menu select Settings then Terminal Preferences
5. Edit the Terminal Preference settings to match the following
•Terminal Modes
Line Wrap: Off
Local Echo: Off
Sound: Off
• Columns: 132
• CR->CR/LF
Inbound: Off
Outbound: Off
•Cursor
Block
Blink: On
• Terminal Font: Fixedsys
• Translations: None
• Show Scroll Bars: On
• Buffer Lines: 100
• Use Function, Arrow, and Ctrl Keys for Windows: Off
6. From the Terminal menu select Settings then Text Transfers.
7. Edit the Text Transfer settings to match the following.
• Flow Control: Standard Flow Control
• Word wrap Outgoing Text at Column: Off
8. From the Terminal menu select Settings then Communications
9. Edit the Communications settings to match those of the Test Set.