Filter
Top Products
422
S:\agilent\8920\8920b\PRGGUIDE\BOOK\CHAPTERS\ibasic.fb
Chapter 7, IBASIC Controller
The TESTS Subsystem
TESTS Subsystem Screens
The TESTS Subsystem uses several screens to create, select, and copy files, and
to run tests.
The Main TESTS Subsystem Screen
Refer to Figure 30 on page 423.
The TESTS (Main Menu) screen is accessed by pressing the front panel TESTS
key. Test procedures are selected and run from this screen. Additionally, access to
all other TESTS Subsystem screens is accomplished from this screen.
The
Select Procedure Location: field is used to select the mass storage
location for the procedure to be loaded. The
Select Procedure Filename:
field is used to select the name of the procedure to be loaded. The
Description:
field gives the user a brief description of the procedure currently selected in the
Select Procedure Filename: field.
To view all the Procedures available on the mass storage location currently
selected in the
Select Procedure Location: field, position the cursor on the
Select Procedure Filename: field and push the rotary knob. A menu will
appear in the lower right corner of the screen, displaying all the procedure files
which are available. This is not a listing of the full contents of the selected mass
storage location, it is only a list of the procedures files that are stored on that
media.