Filter
Top Products
Greensmaster 3420 Page 4 -- 7 Diesel Engine
Air Cleaner Removal (Fig. 3)
1. Park machine on a level surface, lower the cutting
units, stop the engine, engage parking brake and re-
move the key from the ignition switch.
2. Remove air cleaner components as needed using
Figure 3 as a guide.
3. Check air intake hose (item 8) for damage or wear.
Replace hose if damage is found.
4. Disassemble air cleaner a s necessary (Fig. 4).
5. Checkaircleaner housingandcover fordamagethat
could cause possible air leaks.
Air Cleaner Installation (Fig. 3)
IMPORTANT: Any leaks in the air filter system wil l
allow dirt into e ngine and will cause serious engine
damage. Make sure that all air cleaner components
are in good condition and are properly secured dur-
ing assembly.
1. Assemble air cleaner system using Figures 3 and 4
as guides.
A. Ifplug wasremovedfrom aircleaner housing,ap-
ply sealant t o threads of plug before assembly.
B. Make sure that vacuator valve on air cleaner as-
sembly is pointed down after assembly.
C. Make sure that air intake hose (item 8) has clear-
ance around it at all points after air cleaner installa-
tion is completed.
Figure 4
1. Housing
2. Filter element
3. Cover
4. Vacuator valve
5. Plug
1
4
5
3
2
Diesel
Engine