Filter
Top Products
Groundsmaster 4000−DPage 3 − 2Kubota Diesel Engine (Rev. B)
General Information
This Chapter gives information about specifications and
repair of the diesel engine used in the Groundsmaster
4000−D.
General maintenance procedures are described in your
Operator’s Manual. Information on engine troubleshoot-
ing, testing, disassembly and reassembly is identified in
the Kubota Workshop Manual, Diesel Engine, V2003−T
that is included at the end of this section.
Most repairs and adjustments require tools which are
commonly available in many service shops. Special
tools are described in the Kubota Workshop Manual,
Diesel Engine, V2003−T. The use of some specialized
test equipment is explained. However, the cost of the
test equipment and the specialized nature of some re-
pairs may dictate that the work be done at an engine re-
pair facility.
Service and repair parts for Kubota engines are sup-
plied through your Authorized Toro Distributor. If no
parts list is available, be prepared to provide your distrib-
utor with the Toro model and serial number.
Stopping the Engine
IMPORTANT: Before stopping the engine after
mowing or full load operation, cool the turbo-char-
ger by allowing the engine to idle at low speed for 5
minutes. Failure to do so may lead to turbo-charger
trouble.