Filter
Top Products
Groundsmaster 4000−D Page 5 − 9 Electrical System
Fuses
The fuse blocks are located under the operator’s control
panel.
Identification, Function, and Wiring
The fuses are held in two fuse blocks. Use Figure 7 to
identify each individual fuse and its correct amperage.
Each fuse holder has the following functions and wire
connected to it.
Fuse A1
A. Supplies power to the seat switch.
B. Has green wire and red wire (battery).
Fuse A2
A. Supplies power to ignition switch terminal B.
B. Has pink wire and red wire (battery).
Fuse A3
A. Supplies power to the PTO switch.
B. Has yellow wire and red wire (battery).
Fuse A4
A. Supplies power to the starter solenoid.
B. Has orange wire and red wire (battery).
Fuse B1
A. Supplies power to the power point outlet.
B. Has white wire and red wire (battery).
Fuse B4 (when optional lighting is installed)
A. Supplies power for optional light kit.
B. Has two red wires.
Figure 7
10A
5A
10A
10A
10A
A
B
1234
1234
OPT.
Figure 8
Electrical
System