Filter
Top Products
U23841-J-Z915-6-76 57
Managing print jobs Displaying print jobs
where display_template represents the name of the template you want to use.
Defining a display template
To define a display template, proceed as follows:
● Open the .Xprint V7.0 file in your login directory.
● Enter the new display template as follows:
display_template parameter_list
display_template is the name of the template under which the display
template will be called with the xpshow ... -di display_template command.
parameter_list represents a list of options of the xpshow -job command. Here
you use exactly the same options as described under “Displaying attributes
via parameter list” on the previous page.
Your system administrator can also define display templates. These are
saved in the .Xprint V7.0 file in the /var/spool/Xprint/config
directory. This file is searched if the template is not found in your private
.Xprint V7.0 file.
Further display settings
By means of environment variables which you set before calling the display
template, you can define various characteristics of the display:
XP_FS:
With this variable you define the character which is to be used to
separate the horizontal fields. If you do not specify a value, a tab space
is set by default.
XP_FW:
This variable defines the field size in characters. If you explicitly specify
a value, e.g. 10 characters, the entries exceeding this length will be
truncated. If you specify 0, the values will not be truncated but displayed
in full. The default is 7 (characters).
XP_LS:
With this variable you define the separator to be used to separate values
within one field. If this variable is not set, the space character is used by
default.
i