Filter
Top Products
182 U23841-J-Z915-6-76
Administering PCLs Configuring Xprint V7.0
6.13.3 Assigning a comment to a PCL
For better orientation within the system, it may be useful to provide PCLs with
comments, which may be addressed either to users or to the Xprint V7.0 admin-
istrator.
Providing a PCL with a comment for users
You can provide a PCL with a comment that every user can display. You can do
this either when adding the PCL to the system, or later when the PCL is already
defined.
● If you want to assign a comment to an existing PCL, use the following
command:
xpmod -pcl pcl_name -cu for_users
where pcl_name represents the unique name of a PCL, and for_users (cu stands
for comment for user) represents a comment which every user is to be able to
display (using xpshow -pcl pcl_name -di LONG).
Examples
– To display all the PCLs available in the system:
xpshow -pcl
SHORT display
Name File HC HS Host Administrator
---- ---- -- -- ---- -------------
E-9001-31 /var/spool/Spo NO NO d241s045 root
EPSON-SQ /var/spool/Spo NO YES d241s045 root
GENERIC /var/spool/Spo NO NO
Providing a PCL with a comment for the administrator
● If you want to assign to an existing PCL a comment for the Xprint V7.0
administrator, use the following command:
xpmod -pcl pcl_name -ca for_ administrator
where pcl_name represents the unique name of a PCL, and for_administrator
stands for a comment which only the Xprint V7.0 administrator is to be able
to display (xpshow -pcl pcl_name -di LONG).