Filter
Top Products
170 U23841-J-Z915-6-76
Administering filters Configuring Xprint V7.0
6.10.5 Removing a filter from a printer
To remove a filter from a printer, proceed as follows:
● Check whether the relevant printer is activated:
xpstat -dev [selection]
For selection you can either specify a list of the printers you want to display,
or you can use the -scl “selection_criteria_list” option (see the section
“Selection criteria list” on page 266 in the Appendix) to define a list of criteria
according to which the relevant printers are selected. If you do not specify
selection, information on all printers will be displayed.
● Deactivate the printer:
xpchange -dev [selection] -st NOT_ACTIVE
● Cancel the assignment of the filter to the printer:
xpmod -dev [selection] -fl-
● Reactivate the printer:
xpchange -dev [selection]