Filter
Top Products
220 U23841-J-Z915-6-76
Gateways Interoperability
Figure 15: Gateway connection to another printer domain
Defining the local gateway
The local gateway is defined as follows on a host which, if possible, should have
a constant connection to the other Xprint V7.0 domain to which the connection
is to be established:
xpadd -gtw local_gw -tp LOCAL -ho local_host \
-ga
gtw_port -np TCP -pp GIP2 [-aa]
This command configures a local gateway named local_gw which administers
the physical connection to the other Xprint V7.0 domain. For local_gw any
name(s) can be used; it does make sense, however, to use names which
indicate on which host the gateways are configured. With the option -ho
local_host you specify the name of the host which is to act as the gateway from
the local Xprint V7.0 domain to the other Xprint V7.0 domain.