Filter
Top Products
12 U23841-J-Z915-6-76
Xprint V7.0 elements Introduction to Xprint V7.0
● Fonts (-fnt)
Font types supported by the printers in use can be easily accessed through
the definition of fonts.
● Job templates (-jtp)
Job templates serve to simplify the use of frequent print commands by
allowing the options of the xpadd command, which must normally be
specified individually, to be combined in groups. These can then be specified
via the job template.
● Loadable resources(-lrs)
Loadable resources allow faster printing of jobs that use the same
background, logo, soft font etc. They also improve job recovery. A loadable
resource must be downloaded to the printer before it can be called by a print
job.
Public loadable resources can be created, modified or deleted for the whole
system by the Xprint V7.0 administrator. Individual users can create, modify
or delete private loadable resources, that is loadable resources that are for
their use only.
● Permission lists (-prm)
Permission lists make it possible to define who may use which Xprint V7.0
resources by granting the relevant privileges. The administrator can define
the following privileges for users under Xprint V7.0:
– Which users may/may not use a device or a device group in Xprint V7.0
or other environments.
– Which users may/may not use a specific form.
– Which forms may/may not be used on a specific printer.
● Recovery rules (-rec)
Recovery rules are used to describe how specific device conditions are
handled. The default recovery procedure in the case of a device error can be
overridden by a recovery rule. In the case of the device error “paper_end”,
for example, the default is for the Xprint V7.0 system to continue trying to
print the job until the paper cassette is refilled. You could use a recovery rule
to specify a different procedure (for example, to suspend the print job and
set the device to NOT_ACTIVE until the administrator intervenes).