Filter
Top Products
270 U23841-J-Z915-6-76
Axis box support Appendix
– XP_SNMP_SYNC_TIME: Validity period for the SNMP agent copy of the Xprint
V7.0 information. Any access to Xprint V7.0 agent after this time will enforce
a resynchronization of the SNMP agent copy with the "Cache Area". The
value must be number expressing the time in seconds. The default value is
"10" (10 seconds). The value "0" means that the resynchronization with the
"Cache" information occurs at each SNMP access.
The installation aspects are detailed in the release notice.
Axis box support
Introduction
Two axis fast filters have been written to allow Xprint V7.0 to submit job to printer
attached to an axis box and to have a follow-up of the printer status ( i.e. : Printer
Off, Paper End , ...... ).
These filters are implemented via programs respectively called "prosbsd" for the
axis firmware <= 5.20 and "prosbsd6" for axis firmware >= 6.0. The axis box
having a firmware version comprised between 5.20 and 6.0 are not currently
supported by Xprint V7.0. It is suggested to upgrade the axis box firmware to a
version 6.0.
Configuration
The configuration is detailed in the reference guide appendix.
TV-CC integration
When installing the package SIsplgu on a platform where Transview Control
Center product is installed (package TV-CCA at least version 3.1A), Xprint V7.0
is automatically integrated in TV-CCA.
Such integration allows the monitoring of Xprint V7.0 printers: any printer error
will be intercepted by TV-CC that may initiate a reaction via the Xprint V7.0
graphical interface.