Filter
Top Products
U23841-J-Z915-6-76 109
Configuring Xprint V7.0 Predefined printers
6.3.1 Configuring predefined printers
The xpconf_dev command provides a quick and easy method of adding a
predefined printer: Xprint V7.0 automatically selects the suitable emulation for
the specified printer model and it suggests a default configuration which you
only need to adjust, if necessary. Proceed as follows to add a new printer with
xpconf_dev:
● Call xpconf_dev:
xpconf_dev
The displayed screen should read similar to the following:
List of device models and emulations supported by Xprint V7.0
:
-- 1 SNI-2050 HP-LASERJET
-- 2 SNI-4007 EPSON-LQ
-- 3 SNI-4009 EPSON-FX
-- 4 SNI-4009 PROPRINTER
-- 5 SNI-4010 EPSON-LQ
-- 6 SNI-4011 ECMA-9097 ( users only)
-- 7 SNI-4011 EPSON-LQ
-- 8 SNI-4011 EPSON-FX
-- 9 SNI-4014 EPSON-LQ
-- 10 SNI-4014 PROPRINTER
-- 11 SNI-4806 HP-LASERJET
-- 12 SNI-4806 PROPRINTER
-- 13 SNI-4806 HP-GL ( users only)
-- 14 SNI-4810 HP-LASERJET
-- 15 SNI-4810 POSTSCRIPT
Please type a number to select a device model, press return
to start customized processing, ’q’ to quit or ’?’ for help.
You can drive inside devices list using +/- (next/previous
screen):
All the printers contained in the
/var/spool/Xprint/config/data/conf_dev file can be selected in this
way.
● From this list, select your printer model or a similar model with a suitable
emulation by entering the corresponding number and pressing
"Enter".
The selected entry is then marked, e.g.
>> 1 SNI-2050 HP-LASERJET