Filter
Top Products
34 U23841-J-Z915-6-76
Using Xprint V7.0 options Producing Output with Xprint V7.0
3.4.6 Defining separator pages
With printers which are used by many users at the same time or when listing
paper is used, it can make sense to add separator pages between the different
print jobs. This makes it easier to distinguish the print jobs of the individual users
or two different print jobs. For this purpose, Xprint V7.0 offers the option of
defining print jobs with a start or end sheet. Additionally, individual files of one
job can be separated by adding separator sheets.
-js
job_start_sheet
-je
job_end_sheet
-sp
separator_sheet
With a print job you can specify whether start and end sheets are to be
printed, or in the case of several documents also separator sheets between
the documents. The variables of these options can be set to the following
values: BRIEF, FULL and NONE. The default is NONE.
Example
To insert a start sheet of type BRIEF and separator sheets of type FULL for print
job job1:
xpadd -dr file1 file2 file3 -jt job1 -js BRIEF -sp FULL