Filter
Top Products
U23841-J-Z915-6-76 169
Configuring Xprint V7.0 Administering filters
6.10.4 Assigning a filter to a printer
If you frequently use with a printer a specific form which uses a particular format,
it might be useful to assign the printer a special filter for this.
Only fast filters can be assigned to printers.
Proceed as follows:
● Check the printer status:
xpstat -dev [selection]
For selection either specify a list of the printers whose status you want to
display, or use the -scl “selection_criteria_list” option (see section
“Selection criteria list” on page 266 in the Appendix) to define a list of criteria
according to which the relevant printers are selected. If you do not specify
selection, information on all printers will be displayed.
● If necessary, deactivate the printer:
xpchange -dev [selection] -st NOT_ACTIVE
● Assign the relevant filter to the printer:
xpmod -dev [selection] -fl filter_name
For filter_name specify the name of the relevant filter.
● Reactivate the printer:
xpchange -dev [selection]
i