Filter
Top Products
Groundsmaster 4100--DCutting Deck
Page 8 -- 24
Deck Rollers and Skids
1. Roller
2. Flange head screw
3. Roller shaft
4. Flange nut
5. Lock nut
6. Roller
7. Cap screw
8. Flange nut
9. Skid (RH shown)
10. Flange head screw
Figure 23
1
2
3
4
5
6
7
5
6
7
5
6
7
8
10
9
FRONT
RIGHT
Removal (Fig. 23)
1. Remove skids and rollers from deck using Figure 23
as a guide.
Installation (Fig. 23)
1. Installskids to deck usingFigure23 as aguide.Make
sure to install skids in the same mounting hole height
position (lower or upper).
2. When installing roller (item 6), install cap screw with
the threads orientated toward the c enterline of the deck.
Install and tighten lock nut until roller will not rotate, then
loosen lock nut only enough to allow roller to rotate free-
ly.Make suretoinstall alldeck rollers in thesamemount-
ing hole height position (lower or upper).