Filter
Top Products
Groundsmaster 4100--D Cutting DeckPage 8 -- 3
General Information
CAUTION
Never install or work on the cutting deck or lift
arms with the engine running. Always stop en-
gine and remove ignition key first.
Operator’s Manual
The Operator’s Manual provides information regarding
the operation, general maintenance, adjustments and
maintenance intervals for your Groundsmaster cutting
deck. Refer to that publication for additional information
when servicing the machine.
Castor Wheel Tire Pressure
Castor tires on the cutting deck should be inflated to 50
PSI (345 kPa).
Blade Stopping Time
The blades of the cutting deck should come to a com-
plete stop in approximately (5) seconds after the cutting
deck engagement switch is shut down.
NOTE: Makesure the deck isloweredonto a clean sec-
tion of turf or hard surface to avoid dust and debris.
To verify blade stopping stopping time, have a second
person stand back from the deck at least 20 feet and
watch one of the cutting deck blades. Have the operator
shut the cutting deck down and record the time it takes
fortheblades to cometo a completestop.If this stopping
time is excessive, the braking valve(s) (RV2) on the hy-
draulic deck control manifold(s) may need adjustment.
Cutting Deck