Filter
Top Products
Greensmaster 3320/3420 Page 6 -- 15 Electrical System
Service Screen
The service screen (Fig. 20) contains machine opera-
tional information including hours and counts. Values
listed for service menu items cannot be changed.
The options listed for hours include the following:
D Key On identifies the number of hours that the key
switch has been in the RUN position.
D Engine Run identifies the number of hours that the
engine has been running.
D Transport identifies the number of hours that the
machine has been operated in transport speed.
D Mow identifies thenumber ofhours thatthe machine
has been operated with the cutting units engaged.
D Backlap identifies the number of hours that the ma-
chine has been operated with the cutting units engaged
in the backlap position.
D Fan On identifies the number of hours that the ma-
chine has been operated with engine cooling fan en-
gaged.
D Over Temp identifies the number of hours that the
engine has been operated with an excessive tempera-
ture.
The o ptions listed for counts include the following:
D Preheats identifies the number of times that the en-
gine glow plugs have been energized.
D Starts identifies the number of times that the engine
has been started.
To return to the main menu screen from the service
screen, press the bac k button (left button).
1. Service menu
2. Service items
3. Move to menu items
4. Choose menu item
5. Back button
Figure 20
Hours
Key On:
Engine Run:
Transport:
92.5 Hours
88.4 Hours
3.7 Hours
1
5
3
4
5
2
3
Electrical
System