Filter
Top Products
Figure 14.
12. Remove Air Box: Using a 6mm allen wrench remove the
four intake manifold socket head cap screws. See Figure
15. Using a 4mm allen wrench, remove the four airbox
allen head shoulder bolts. While removing the airbox
remove the four rubber washers. See Figure 16.
Figure 15.
Figure 16.
13. Unbolt Oil Cooler: Using a 10mm socket remove the two
10mm bolts from the front of the oil cooler. See Figure
17. Remove the two 10mm bolts from the rear of the oil
cooler. See Figure 18.
Figure 17.
Figure 18.
Page 155
DISASSEMBLY
SECTION 6.1
MAJOR DISASSEMBLY
PART 6