Filter
Top Products
Groundsmaster 3505--DHydraulic System Page 4 -- 70
Hydraulic Manifold Service
1. Manifold body
2. NWD #4 plug
3. Logic cartridge valve (LC1)
4. Nut
5. Solenoid coil
6. Solenoid cartridge valve (R1)
7. Braking cartridge valve (BV)
Figure 44
FRONT
RIGHT
1
4
25 ft--lb
(34 N--m)
60 in--lb
(6.8 N--m)
6
2
7
3
5
35 ft--lb
(47 N--m)
45 to 50 ft--lb
(61to68N--m)
120 in--lb
(13.6 N--m)
NOTE: The ports on the manifold are marked for easy
identification of components. Examples: BV is the deck
circuit braking valveand P1is thegear pump connection
port (see Hydraulic Schematic to identify the function of
the hydraulic lines and cartridge valves at each port
location).
NOTE: The Groundsmaster 3505--D hydraulic man-
ifold uses several zero leak plugs. These plugs have a
tapered sealing surface on the plug head that is de-
signed to resist vibration induced plug loosening. The
zero leakplugs alsohave ano--ring asa secondaryseal.
If zero leak plug removal is necessary, lightly rap the
plug head using a punch and hammer before using an
allen wrench to r emove the plug: the impact will allow
plug removal with less chance of damage to the socket
head of the plug.