Filter
Top Products
Groundsmaster 4100--D/4110--DPage 5 -- 8Electrical System
InfoCenter Display
The InfoCenter Display used on your Groundsmaster is
a LCD device that is located on the console. The Info-
Center provides information for the machine operator
during machine operation, provides electrical system
diagnostic assistance for technicians and allows inputs
for adjustable m achine settings.
Power for the InfoCenter is available when energized by
the main power relay (ignition switch in the RUN or
START position). A CAN--bus system involving the ma-
chine TEC controllers, the Yanmar engine electronic
control unit and the InfoCenter is used to provide neces-
sary machine communication for InfoCenter operation.
Splash Screen
The two (2) InfoCenter splash screens (Figs. 8 and 9)
are displayed when the ignition switch is initially turned
to the RUN or START position. Thesplash screens allow
basic machine information to be reviewed by the operat-
or. After each of the splash screens has been on the In-
foCenter for several seconds, the main information
screen will be d isplayed on the InfoCenter.
The splash screens can be used to identify machine bat-
tery voltage, fuel level, hourmeter reading, hydraulic oil
temperature and engine status.
1. Battery voltage
2. Fuel gauge
3. Hour meter
4. Right button
5. Down button
6. Menu/back button
Figure 8
1
2
6
5
12.6V
4
3
95.2
T
1. Battery voltage
2. Hydraulic oil temperature
3. Fuel gauge
4. Engine RPM
5. Right button
6. Down button
7. Menu/back button
Figure 9
1
3
7
6
0
12.6V
2
RPM
140
180
220
o
F
5
4