Filter
Top Products
68
Chapter 3: Testing Performance
To test the time interval accuracy
d Select an Acquisition Depth of 256K.
5 Configure the logic analyzer channels:
a Click the Buses/Signals tab. In the Buses/Signals tab, click Delete All at
the bottom of the dialog.
b Using the mouse, select Pod 1 channel 0 to activate the channel.
c Click the threshold field for Pod 1. In the Threshold Settings dialog,
select Standard and ECL (–1.30).
d Click OK to close the Threshold Settings dialog.
e Click OK to close the Analyzer Setup dialog.
6 Set up the trigger in the Waveform window:
a Select the Simple Trigger field next to bus/signal name My Bus 1.