Filter
Top Products
141
Chapter 6: Replacing Assemblies
1690A,AD-series disassembly/assembly
To remove the front panel and front frame
1 Do the following procedures:
To remove the chassis fron the sleeve
To remove the fascia
To remove the acquisition board
2 Remove the trim strips from the top and sides of the front frame.
3 Using a Torx T-15 screwdriver remove four screws that secure the top of
the front panel to the front frame.
4 Using a Torx T-15 screwdriver, remove four screws that secure the bottom
of the front panel to the front frame, as shown.
5 Using a Torx T-15 screwdriver, remove four screws that secure the front
frame to the deck.