Filter
Top Products
131
Chapter 6: Replacing Assemblies
1680A,AD-series disassembly/assembly
5 Reverse this procedure to install the inverter board.
To remove the fans
1 Do the procedure "To remove the chassis from the sleeve".
2 Disconnect the fan cables from the distribution board.
3 Using needle-nosed pliers, remove the plastic push fastener insert from
the push fasteners securing one of the fans to the chassis.
4 Disengage the fan from the push fasteners and remove the fan through the
bottom of the chassis.
5 If necessary, repeat steps 2 through 4 for the remaining fan.
6 Reverse this procedure to install the fans.