Filter
Top Products
148
Chapter 7: Replaceable Parts
E3 5090-4833 6 Grabber Kit Assembly (1681A, AD)
E3 5090-4833 4 Grabber Kit Assembly (1682A, AD)
E3 5090-4833 2 Grabber Kit Assembly (1683A, AD)
E4 5959-9333 0 Replacement Probe Leads (Qty 5)
E5 5959-9335 0 Replacement Pod Grounds - 5” (Qty 2)
E6 5959-9334 8 Probe Grounds - 2” (Qty 5, 1680A, AD)
E6 5959-9334 6 Probe Grounds - 2” (Qty 5, 1681A, AD)
E6 5959-9334 4 Probe Grounds - 2” (Qty 5, 1682A, AD)
E6 5959-9334 2 Probe Grounds - 2” (Qty 5, 1683A, AD)
H1 0380-1927 6 Hex Standoff 0.185 in (I/O panel to motherboard
ports)
H2 0515-0365 3 M2.0 x 0.40; 4 mm T6 PH (CD-ROM drive to CD-
ROM drive bracket)
H3 0515-0372 40 M3.0 x 0.50; 8 mm T10 PH (I/O panel to chassis,
module cover to chassis, CD-ROM top bracket to
CD-ROM bottom bracket, distribution board to
chassis, probe shroud to acquisition board,
acquisition board to chassis, probe shroud to
chassis, PCI board and ISA slot covers to chassis,
CD-ROM drive assembly to chassis, sleeve to
chassis)
H4 0515-0433 12 M4.0 x 0.70; 8 mm T20 PH (power supply to
chassis, cable tray to sleeve, rear feet to chassis)
H5 0515-1403 8 M4.0 x 0.70; 6 mm T15 90° FH (snap to sleeve
(accessory pouch), front panel assembly to chassis)
H6 0515-1934 2 M2.5 x 0.45; 6 mm T8 PH (inverter to chassis)
H7 0515-1974 2 M2.5 x 0.45; 4 mm T8 PH (flexible disk drive to
chassis)
H8 0515-2306 5 M3.0 x 0.5; 10 mm T10 PH (probe cable to probe
shroud, 1680A, AD)
H8 0515-2306 4 M3.0 x 0.5; 10 mm T10 PH (probe cable to probe
shroud, 1681A, AD)
H8 0515-2306 3 M3.0 x 0.5; 10 mm T10 PH (probe cable to probe
shroud, 1682A, AD)
H8 0515-2306 2 M3.0 x 0.5; 10 mm T10 PH (probe cable to probe
shroud, 1680A, AD)
H9 2360-0452 4 6-32 0.250 in T15 PH with washer (hard disk drive
to chassis)
H10 2950-0054 2 Hex Nut 0.625 x 0.125; 1/2-28 (acquisition board
BNC connectors to probe shroud)
Replaceable Parts
Ref. Des. Agilent Part Number QTY Description