Filter
Top Products
125
Chapter 6: Replacing Assemblies
1680A,AD-series disassembly/assembly
3 If the I/O panel requires replacement, then EMI gasket (01680-87102)
must be installed into the replacement I/O panel. The gasket is installed as
follows:
a Two 80 mm sections are installed, one on each side of the top center
screw hole.
b One 160 mm section is installed centered along the bottom edge of the
I/O panel directly beneath the keyboard, USB, COM1, VGA and audio
ports.
4 Install the I/O panel onto the replacement motherboard. (Shown in step 2
on previous page.)
5 Install 6 hex studs onto the motherboard ports and tighten.