Filter
Top Products
126
Chapter 6: Replacing Assemblies
1680A,AD-series disassembly/assembly
To remove the front panel assembly
1 Do the procedure "To remove the chassis from the sleeve".
2 Using diagonal cutters, cut the tie wrap off the on/off cable.
3 Disconnect the display cable from the PCI display board.
4 Disconnect the following cables from the distribution board:
on/off cable (accessed from the bottom of the chassis)
keyboard cable
inverter cable
5 Using a Torx T-15 screwdriver, remove four screws that secure the front
panel assembly to the chassis. Lift the front panel assembly away from the
chassis.