Filter
Top Products
51Setting options and defaults
Setting Norton Ghost options and defaults
To install the Microsoft DOS Client files
1 In the Ghost Basic window, click Options.
2 In the Norton Ghost 2003 Options dialog box, click DOS Type.
3 Insert a floppy disk containing the MS-DOS LAN Client files into drive A,
and then click Supply MS-DOS LAN Client Files.
Setting the image integrity check default
You can set a default option for Norton Ghost to perform an integrity check of an
image file after it has been created and before it is restored.
Some CD-RW drives eject a CD once an image has been saved to it. If this is
preventing the integrity check, then ensure that this option is not selected, and
perform an integrity check using the Image Integrity Check Wizard.
See “Checking the integrity of an image file” on page 58.
To set Norton Ghost to perform an integrity check on an image file
1 In the Ghost Basic window, click Options.
2 In the Norton Ghost 2003 Options dialog box, click Image Integrity check.
3 Check Always perform an image integrity check to set the default.
4 Click OK.
Setting a compression level
A compression level can be set as a default or from a wizard. You can set the
compression level to None, Fast, or High. Compression is set to Fast by default.
See “Image files and compression” on page 62.