Filter
Top Products
179Transfer methods and hardware setup
SCSI tape drives
SCSI tape drives
To use Norton Ghost with a SCSI tape device, the tape media and the tape device
must have an Advanced SCSI Programming Interface (ASPI) driver for DOS
installed. The driver is installed in the Config.sys file as shown in the following
example:
device=C:\scsitape\aspi4dos.sys
The Norton Ghost wizards automatically attempt to detect and load Adaptec
SCSI cards. If this succeeds you do not need to make any additions to Config.sys.
If Norton Ghost does not detect the SCSI card, you can add the drivers in one of
the following ways:
■ In the Norton Ghost wizards, in the Preferences and Options dialog box, on
the SCSI driver settings tab.
■ In the Norton Ghost wizards, in the Preferences and Options User dialog
box, on the User Files tab. This lets you make an addition to Config.sys.
Refer to the documentation included with the SCSI tape device for more
information.
Removable media
The removable media drive, media, and media drivers for use in DOS are
required.
CD/DVD usage
A CD/DVD writer and blank CD-R/RW or DVD media are required.
See “Image files and CD/DVD writers” on page 112.