Filter
Top Products
49Setting options and defaults
Setting Norton Ghost options and defaults
5 Check Show information screen about the DOS version of Ghost to display
the warning that Norton Ghost restarts into DOS while running a task.
6 Click OK.
Setting the DOS version
By default, Norton Ghost includes PC-DOS in the Virtual Partition. However,
some computer models may not start from a Virtual Partition that contains PC-
DOS. If your computer does not start from the Virtual Partition, set the default
option to MS-DOS.
You must provide MS-DOS on a floppy disk formatted on a Windows 95/98
computer before you can run Norton Ghost with MS-DOS.
See “Providing MS-DOS” on page 89.
To set DOS files
To select a DOS version
1 In the Ghost Basic window, click Options.
2 On the DOS Type tab, select one of the following:
■ Use PC-DOS: Includes PC-DOS in the Virtual Partition.
■ Use MS-DOS: Includes MS-DOS in the Virtual Partition.
3 Click OK.
To install MS-DOS
1 Insert the MS-DOS formatted floppy disk into drive A of the computer on
which Norton Ghost is running.
2 In the DOS Type window, click Get MS-DOS Files.
3 Click OK.
To uninstall MS-DOS
1 In the DOS Type window, click Remove MS-DOS Files.
2 Click OK.
Installing MS-DOS Client files
If you are using the mapped network drive functionality and MS-DOS, you must
include the Microsoft DOS Client files. You must install the files on the computer
before you can include them in the Virtual Partition.