Filter
Top Products
48 Setting options and defaults
Setting Norton Ghost options and defaults
To set the options for a mapped network drive
1 While running a Windows wizard task, in the Advanced Settings window,
click Advanced Settings.
2 Click Map network drive.
3 Do one of the following:
■ Select a network card from the drop-down list.
Norton Ghost displays any installed drivers that it detects. Select the
network driver for the particular make and model of the network card
that is installed on the computer.
See “Selecting a template” on page 84.
■ Click Browse to open the Ghost Boot Wizard and select a network card.
From the Ghost Boot Wizard, you can add a network card. If your
network card is not on the list, you can modify a network card template.
See “Selecting a template” on page 84 and “Adding network drivers to
the Ghost Boot Wizard” on page 86.
4 Select one of the following:
■ Use DHCP: Use this option if your network contains a DHCP server.
■ Static IP Address: Complete the fields below this option if your network
does not contain a DHCP server.
5 In the Network resource field, type a network resource.
6 In the User name field, type a user name.
7 In the Domain field, type a domain name.
8 Click OK.
Setting display options
You can set some default display options.
To set display options
1 In the Ghost Basic window, click Options.
2 Click Display.
3 Check Show Norton Ghost tray icon on start up to display the Norton Ghost
icon in the taskbar.
4 Check Show disaster recovery warning before running a Norton Ghost task
to display the Disaster Recovery dialog box before running a task.