Filter
Top Products
160 Command-line switches
Command-line switches
Type Based On Value
M Manufacturer Compaq
P Product name Deskpro EN Series SFF
V Version Award Software
S Serial number H925CKH60020
U UUID 2DA9379B4707D31185E8C800A4F232BC
C M&P combined Compaq Deskpro EN Series SFF
I PIII ID 0000067200028E72A6994A20
-locktype= Type Lets you lock an image file for use with a specific set of computers defined by the type
chosen and the source computer.
For example, ghost -locktype=P creates an image that can be used only on systems that
have the same product name type as the source computer.
-lpm The LPT master mode switch causes Norton Ghost to automatically go into LPT master
mode, and is the equivalent of selecting LPT Master from the main menu.
See “Peer-to-peer connections” on page 178.
-lps The LPT slave mode switch causes Norton Ghost to automatically go into LPT slave mode,
and is the equivalent of selecting LPT Slave from the main menu.
See “Peer-to-peer connections” on page 178.
-memcheck Activates internal memory usage checking for Technical Support.
-noauto Disables the automatic naming of spanned image files during creation. The user is
prompted for confirmation of the next destination location for the remainder of the image
file that is being restored.
-noautoskip Includes the hibernation and skip files in the image file. These files are excluded by
default.See “Hibernation and swap files” on page 69.
-nofile Disables the Image File Selection dialog box. Useful when opening directories with large
numbers of files and slow links.
-noide Disables access to IDE devices.
-noindex Prevents Norton Ghost from creating an index when creating an image file. This slightly
reduces the size of the image file and saves memory but Ghost Explorer is much slower in
reading the image file. This switch is useful if you are saving an image file from a large disk
with very little memory.