Filter
Top Products
167Command-line switches
Clone switch usage
Cloning combination options
Table A-2 illustrates the possible cloning operations that you can perform.
Setting a source for the clone switch
The syntax for this switch is as follows:
SRC={disk | file | tape |cd/dvdwriter }
Table A-2 Cloning operations
Mode Source Destination
copy
■ disk ■ disk
restore
Note: The load switch has been
replaced by the restore switch. The
load switch is still fully functional and
is interchangeable with restore.
■ file
■ tape
■ CD-ROM
■ USB 1.1 and 2.0
Mass Storage Device
■ DVD
■ disk
create
Note: The dump switch has been
replaced by the create switch. The
dump switch is still fully functional
and is interchangeable with create.
■ disk ■ file
■ tape
■ CD writer
■ USB 1.1 and 2.0
Mass Storage
Device
■ DVD
pcopy
■ disk:partition ■ disk:partition
prestore
Note: The pload switch has been
replaced by the prestore switch. The
pload switch is still fully functional
and is interchangeable with prestore.
■ file:partition
■ tape:partition
■ CD:image:partition
■ USB 1.1 and 2.0
Mass Storage Device
■ disk:partition
pcreate
Note: The pdump switch has been
replaced by the pcreate switch. The
pdump switch is still fully functional
and is interchangeable with pcreate.
■ disk:partition
■ partition:partition
You can specify more
than one partition.
■ file
■ tape
■ CD writer
■ USB 1.1 and 2.0
Mass Storage
Device
■ DVD