Filter
Top Products
Chapter 6 Troubleshooting Host Devices 69
Sun Proprietary/Confidential: Internal Use Only
TABLE 6-1 lists all the host events in the Storage Automated Diagnostic Environment.
TABLE 6-1 Storage Automated Diagnostic Environment Event Grid for the Host
Component
EventT ype
Severity
Action
Description
Information
HBA Alarm+ Yellow The status of hba /
devices/sbus@9,0/
SUNW,qlc@0,30000/
fp@0,0:devctl on
diag.xxxxx.xxx.com.
The status changed from
not connected to
connected.
Monitors changes in the
output of the
luxadm -e port.
HBA Alarm- Red Y The status of hba
/devices/sbus@9,0/
SUNW,qlc@0,30000/
fp@0,0:devctl on
diag.xxxxx.xxx.com.
The status changed from
connected to not
connected.
• Monitors changes in the
output of the luxadm -e
port.
• Finds the path to 20
HBA ports.
LUN.
t300
Alarm- Red Y The state of
lUN.t300.c14t50020F2
300003EE5d0s2.status
Aon
diag.xxxxx.xxx.com.
The status changed from
OK to error
(target=t3:diag244-t3b0/
90.0.0.40).
The luxadm display
reported a change in the
port status of one of its
paths. The Storage
Automated Diagnostic
Environment tries to find
the enclosure
corresponding to this path
by reviewing its database
of Sun StorEdgeT3+ arrays
and virtualization engines.
LUN.
VE
Alarm- Red Y The state of
LUN.VE.c14t50020F230
0003EE5d0s2.statusA
on diag.xxxxx.xxx.com.
The Status changed from
OK to error
(target=ve:diag244-
ve0/90.0.0.40).
The luxadm display
reported a change in the
port status of one of its
paths. The Storage
Automated Diagnostic
Environment tries to find
the enclosure
corresponding to this path
by reviewing its database
of Sun StorEdgeT3+ arrays
and virtualization engines.