Filter
Top Products
126 Sun StorEdge 3900 and 6900 Series 2.0 Troubleshooting Guide • March 2003
Sun Proprietary/Confidential: Internal Use Only
Restarting the slicd Daemon
Follow this procedure to restart the slicd daemon if the SLIC daemon becomes
unresponsive, or if a message similar to the following is displayed:
connect: Connection refused or Socket error encountered..
▼ To Restart the slicd Daemon
1. Check whether the slicd daemon is running:
2. Use the ipcs(1) command to check for any message queues, shared memory, or
semaphores still in use:
Segments identified with 0x5555aa in the address are associated with slicd.
3. Remove the segments by typing the following:
Refer to the ipcrm(1) man page for details.
The message queues, and shared memory and semaphores have been removed.
# ps -ef | grep slicd
# ipcs
IPC status from <running system> as of Wed Feb 20 12:48:30 MST 2002
T ID KEY MODE OWNER GROUP
Message Queues:
Shared Memory:
m 0 0x50000483 --rw-r--r-- root root
m 301 0x5555aa8a --rw------- root other
m 302 0x5555aaaa --rw------- root other
m 303 0x5555aaba --rw------- root other
m 4 0x7cc --rw------- root root
Semaphores:
s 196608 0x5555aa9a --ra------- root other
s 196609 0x5555aa7a --ra------- root other
s 196610 0x5555aaba --ra------- root other
s 3 0x10e1 --ra------- root root
# ipcrm -m 301 -m 302 -m 303 -s 196608 -s 196609 -s 196610