Filter
Top Products
70 Registering a Remote Party – Phone Book
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\04SET.FM
masterpage:Left
When you set “Number of Lines” to “2B”, you
can connect to the remote party by selecting
“ISDN (2B)” from “Line I/F” in the Detail
Dial menu.
To set up more detailed options
When “More Options Enable” is set to “On”
in the Dial Setup menu, the More Options
button is shown at the lower part of the List
Edit menu.
Select the More Options button with the V,
v, B or b
button on the Remote Commander
and press the PUSH ENTER button to open
a menu for more detailed dial settings. You
can change the settings of the desired items.
The contents set with the More Options button
have priority over those set in the Detail Dial
Setup menu.
You can change the telephone number, IP
address, name or setting registered in the
Phone Book.
1 Open the Phone Book menu.
2 Use the V, v, B or b button on the
Remote Commander to select the
remote party to be changed in the
Phone Book menu, then press the
PUSH ENTER button.
The submenu appears.
3 Press the V or v button on the Remote
Commander to select “Edit”, then
press the PUSH ENTER button.
The List Edit menu appears.
4 Change the telephone number, IP
address, name or setting.
5 Use the V, v, B or b button on the
Remote Commander to select “Save”,
then press the PUSH ENTER button.
The correction is completed.
Note
Note
Changing the Contents of the
Phone Book
Dial
Edit
Copy
Delete
Cancel