Filter
Top Products
152 Displaying the Picture on a Projector or Monitor
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\07OPE.FM
masterpage:Left
RGB OUT (DSB): Outputs the signal to a monitor (monitor D in the
illustration above) connected to the RGB OUT connector of the Data
Solution Box.
When connecting a monitor to the RGB OUT connector on the
Data Solution Box
The menus may not be displayed. In this case, change the setup of your system
as described below.
1 Connect your monitor to the RGB OUT connector of the Communication
Terminal.
2 Set “Connection” in the Video Setup menu to “RGB OUT (DSB)”.
3 Reconnect the monitor to the RGB OUT connector of the Data Solution
Box.
The first monitor for displaying motion pictures is fixed to the monitor
connected to the VIDEO OUT MONITOR 1 connector of the Communication
Terminal (monitor A in the illustration of the previous page).
Select the output to the second and third monitors with “Connection” in the
Video Setup menu.
VIDEO OUT2: Outputs the signal to the monitor connected to the VIDEO
OUT MONITOR 2 connector (monitor B in the illustration of the previous
page) of the Communication Terminal.
RGB OUT: Outputs the signal to the monitor (monitor C in the illustration of
the previous page) connected to the RGB OUT connector of the
Communication Terminal.
DSB: Outputs the signal to the monitor (monitor D in the illustration of the
previous page) connected to the RGB OUT connector of the Data Solution
Box.
Outputting the Signal to the Second or Third Monitor