Filter
Top Products
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\09OPE.FM
masterpage:Left
163Connection Examples for a Multipoint Videoconference
Connection Examples for a Multipoint
Videoconference
Installing the optional PCSA-M3G70 H.323MCU software in a
Communication Terminal allows you to conduct multipoint videoconferences
with up to six points.
Connecting five monitors allows you to display several points on the monitors.
The point names are displayed on-screen.
If you are already conducting a two-point videoconference when a third point
call, the system automatically opens a multipoint conference. This is referred
as the “on-the-fly” function.
For a multipoint videoconference only the Communication Terminal in which the
PCSA-M3G70 H.323 MCU software can be installed is used as main terminal. If you
want to use multiple Communication Terminals as main terminals depending on the
type of conference, the same number of H.323 MCU software as that of the main
terminals is required.
Using the LAN Connection (Up to 6 Points)
Note
POWER
POWER
POWER
POWER
POWER
TERMINAL VISCA OUT
(MIXED)
AUX
AUX
MONITOR
LINE
AUX CONTROL
MCU VIDEO OUT
VIDEO OUT
AUDIO OUT AUDIO IN
MIC
MAIN SUB
EC-MIC
CTRL-S
RGB OUT DSB
ISDN UNIT
IR OUT
12
1234
12
12
12
5
DC 19.5V
CAMERA CAMERAAUX IN AUX IN
WHITE
BOARD
100BASE-TX/
10BASE-T
(PLUG IN POWER)
LAN
PCSA-M3G70
H.323 MCU
software
to 100BASE-TX/
10BASE-T
UTP cable (category 5, straight)
(not supplied)
to LAN