Filter
Top Products
174 Setting for a Multipoint Videoconference
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\09OPE.FM
masterpage:Left
When PCSA-M0G70 H.320 MCU software (for ISDN) is installed
Select “ISDN” or “ISDN (Telephone)”, and enter the line numbers or phone
numbers of all the parties for the multipoint videoconference in text boxes A to E.
When both PCSA-M3G70 H.323 MCU software (for LAN) and PCSA-
M0G70 H.320 MCU software (for ISDN) are installed
Select Multipoint and a drop-down list is displayed to the right of text boxes A to E.
When using a LAN, enter the IP address, and select “IP” from the drop-down list.
When using ISDN, enter the line number, and select “ISDN” from the drop-
down list.
When using ISDN (Telephone), enter the telephone number, and select “ISDN
(Telephone)” from the drop-down list.
Enter all the parties for the multipoint videoconference.
For details on the setups, see step 5 in “Registering a New Remote Party”
on page 68.
5 Press the V or v button to select “Save”, then press the PUSH ENTER
button.
The registration of the multipoint connection list is completed.
To specify a remote party registered in the Phone Book to the multipoint
connection list
1 Use the V, v, B or b button on the Remote Commander to select the name
you want to register in the multipoint connection list.
2 Press the button on the Remote Commander, or press the PUSH
ENTER button to open the submenu, press the V or v button to select “
On”, then press the PUSH ENTER button.
List Edit
A1
Index
MULTI LIST2
Line I/F
LAN Bandwidth
Multipoint
1024 Kbps
A2
B1
B2
C1
C2
IP
IP
IP
IP
IP
IP
Save Cancel
Smith Paris
Conf. B H.Q Osaka
0-9
A-1
J-S
T-Z
Recent
Phone Book
New Entry
Cancel
AUTO
Mary
On
Dial
Edit
Copy
Delete
Cancel