Filter
Top Products
44 Registering Local Information
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\04SET.FM
masterpage:Left
The selected setup menu appears.
4 Set the respective items.
For details on individual items, see the
relevant menu pages.
5 After the setting is completed, use the
V, v, B or b button to select “Save”,
then press the PUSH ENTER button.
The setting is saved, and the Setup menu
(for the administrator) is restored.
To cancel the setup
Use the
V, v, B or b button on the Remote
Commander to select “Cancel”, then press
the PUSH ENTER button. Or press the
RETURN button on the Remote
Commander.
To page up or down the selected
menu
Use the
V, v, B or b button on the Remote
Commander to select the Page box, then
press the b button to advance the page and
the
B button to go back to the previous page.
The Dial Setup menu is used to set the
attributes for dialing.
Page 1/2
Line I/F
Allows you to select the line interface that
you normally use.
IP: Connects a videoconferencing system
via a LAN.
ISDN: Connects a videoconferencing
system via ISDN.
ISDN (Telephone): Connects an audio-only
telephone via ISDN (voice meeting).
Bonding
*
Allows you to select whether you use a
process called bonding to connect multiple
ISDN lines.
Through bonding, the connection of one line
enables you to automatically connect all
other lines.
*
Bonding (Bandwidth on Demand
Interoperability Group) is a registered
trademark of THE BONDING
CONSORTIUM.
Auto: Automatically activates the
connection through bonding if this
feature is available at the remote party.
On: Always connects a remote party
through bonding.
Telephone Mode
Allows you to select the audio compression
format when conducting a voice meeting.
Auto: Selects an appropriate format
automatically.
Line I/F
IP
Page: 1/2
Auto
Auto
Off
Off
Bonding
Telephone Mode
More Options Enable
User Name Input
Dial Setup
Save Cancel
Dial Setup Menu
Line I/F
IP
Page: 1/2
Auto
Auto
Off
Off
Bonding
Telephone Mode
More Options Enable
User Name Input
Dial Setup
Save Cancel