Filter
Top Products
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\09OPE.FM
masterpage:Left
179Starting a Multipoint Videoconference
For details on the setups, see step 3 in “To call a remote party not
registered in the Phone Book” on page 79.
4 Select “Dial”, and press the PUSH ENTER button on the Remote
Commander. You can also press the CONNECT/DISCONNECT ( /
)
button on the Remote Commander.
The system begins dialing the numbers selected in step 3. “Dialing” appears
on the monitor screen, and the ON LINE indicator (blue) on the
Communication Terminal blinks.
When the system connects to all the remote parties, the message “Meeting
starts!” appears on the screen, and the ON LINE indicator stops blinking and
lights.
To call additional remote parties
After starting communication with the remote party selected first, press the
CONNECT/DISCONNECT ( / ) button on the Remote Commander to
open the submenu.
Perform steps 1 through 4 of the procedure shown in “To call remote parties
by selecting from the Phone Book” on page 176 or steps 1 through 4 of the
procedure in “To call remote parties not registered in the Phone Book” on page
178 depending on the registration status of each remote party.
Multipoint
Line I/F
Detail Dial
CancelSaveDial
A
B
C
D
E
IP
IP
IP
IP
IP
Disconnect Phone Book
Detail Dial
History
Cancel