Filter
Top Products
64 Registering Local Information
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\04SET.FM
masterpage:Left
The ISDN Setup menu is used to set up
ISDN lines.
The ISDN Setup menu only appears when
the optional PCSA-B384S, PCSA-B768S or
PCSA-PRI ISDN Unit is installed in your
system.
ISDN Page 1/4
Country/Region
Allows you to select the country or region
where you are using the Communication
Terminal. You can select between Europe
(except France), France, Japan, USA, China,
and Other.
Protocol
Allows you to select the protocol of the
ISDN lines to be used. You can select Japan
(NTT), Euro ISDN, Euro ISDN (France),
National ISDN, 5ESS (P-MP), 5ESS (P-P),
or DMS-100, depending on the interface that
you are using.
You can select Japan (NTT), Euro ISDN,
Euro ISDN (France), National ISDN,
5ESS(P-MP), 5ESS(P-P) or DMS-100
depending on the interface you are using.
For customers in the USA and Canada, see
“SPID Settings for Customers in the USA
and Canada” on page 65.
ISDN Page 2/4
Area Code
Enter the area code of the ISDN line to be
used. Do not enter the first 0 of the area code.
Local Number
Enter the line number (local number) of the
ISDN line to be used.
ISDN Page 3/4
The A1 to C2 fields appear.
Sub Address
Enter sub-addresses when registering them.
Sub-addresses can only be composed of
numbers.
• When you select an empty field and then
press the PUSH ENTER button of the
Remote Commander, the setting of the
previous field is copied into the selected
field.
ISDN Setup Menu
Note
Japan NTT
Country/Region
USA
Page: 1/3
National ISDNProtocol
ISDN
Save Cancel
Notes
ISDN
Save Cancel
Area Code Local Number
A2
A1
B1
B2
C1
C2
Page: 2/4
ISDN
Save Cancel
Sub Address
A2:
A1:
B1:
B2:
C1:
C2:
Page: 3/4