Filter
Top Products
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\07OPE.FM
masterpage:Left
147Using Audio/Video Signal from the Connected Equipment for a Conference
RGB B: Select the picture from the computer connected to the RGB IN B
connector.
3 Press the PUSH ENTER button on the Remote Commander.
The indicator of the RGB A or RGB B button on the upper panel of the Data
Solution Box lights according to the selected input.
Even if you select the input with the buttons on the Data Solution Box, the display in
the Video Input Select menu will not change.
To transmit a picture from a computer connected to the Data Solution Box
Press the SEND button on the upper panel of the Data Solution Box.
The indicator on the SEND button lights and the picture of the equipment
selected with the RGB A or RGB B button or the VIDEO INPUT SELECT
button is displayed on the projector, etc. connected to the RGB OUT connector
on the Data Solution Box. While in communication, the picture selected on the
Data Solution Box is transmitted to the remote party simultaneously.
Such computer picture is displayed without any conversion as input to the Data
Solution Box. The detailed portion of the picture transmitted to the remote
party may not be clearly seen and the number of frames may be reduced.
For details on picture quality, see “Picture quality of the data solution box”
on page 148.
For picture transmission using the Remote Commander, see page 121.
Note
Video Input Select
Local1
Main
Split
Off
Local2
Main
Far DSB Input
RGB A
SEND button